MIL-DTL-22777G
4.6 Test methods.
4.6.1 Non-marking test. The corner edge of the sole or heel shall be drawn across a sheet of white
paper using moderate pressure. If only a light mark is made which is easily erased by rubbing with the
fingers, the heels and soles shall be classified as non-marking.
5. PACKAGING.
5. 1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the
contract or order (see 6.2). When actual packaging of material is to be performed by DoD personnel,
those personnel need to contact the responsible packaging activity to ascertain requisite packaging
requirements. Packaging requirements are maintained by the Inventory Control Point's packaging activity
within the Military Department or Defense Agency, or within the Military Department's System Command.
Packaging data retrieval is available from the managing Military Department`s or Defense Agency's
automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not
mandatory.)
6.1 Intended use. The soles and heels are intended for use as components of work and safety footwear.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number and date of this specification.
b. Types, classes and sizes required (see 1.2).
c. Issue of DoDISS to be cited in the solicitation and, if required, the specific issue of individual
documents referenced (see 2.2.2 and 2.3.2).
d. When first article inspection is required (see 3.1 and 6.3).
6.3 First article. When a first article is required, it shall be inspected and approved under the appropriate
provisions of Federal Acquisition Regulation (FAR) 52.209-4. The first article should be a reproduction
sample. The contracting officer should specify the appropriate type of first article and the number of units
to be furnished. The contracting officer should also include specific instructions in acquisition documents
regarding arrangements for selection, inspection, and approval of the first article. (see 3.1)
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business