MIL-DTL-22777G
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a. First article inspection (see 4.2).
b. Quality conformance inspection (see 4.3).
4.2 First article inspection. When a first article is required (see 3.1, 6.2 and 6.3), it shall be tested for
the characteristics specified in 4.5.
4.3 Quality conformance inspection. Unless otherwise specified, sampling for inspection shall be
performed in accordance with ASQ Z1.4.
4.3.1 Component and material certification. A certificate of compliance shall be acceptable as evidence
that the characteristics listed in Table II conform to the specified requirements.
4.4 End item testing. The methods of testing specified in FED-STD-601 and ASTM Test methods, and
those listed in Table II shall be followed, as applicable. All test reports shall contain the individual values
utilized in expressing the final results.
Table II - End item testing.
Number of
Rqmt.
Test
Sample
determinations
Results
Component
Characteristics
para.
Method
unit
per sample unit
reported as
Soles and
Abrasive index
heels
Before aging
3.2.1
ASTM-D-
X
3
Nearest whole
1630
number
After aging
3.2.1
ASTM-D-
X
3
Nearest whole
1630 1/
number
Hardness
Before aging
3.2.1
ASTM-D-
X
4
Nearest whole
1630
number
After aging
3.2.1
ASTM-D-
X
4
Nearest whole
1630 1/
number
Volume swell
3.2.1
ASTM-D-
X
3
Percent
471
(Nearest whole
number)
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business